An item was added to cart!
Commercial J Channel (6'ft)
Commercial Edge Mount LED Channel
This is a heavy steel like used on metal roofing. It is designed to be installed over the outermost edge of the flat roof. Normally seen on commerical buildings. We use this on our intalls.
Commercial channel can be drilled to your specs. depending on the lighting system you use.. (Contact us for needed changes to fit special applications) This product comes in a variety of colors to closely match your business’s trim.
It is sold by the foot with a minimum order of 6′. It is recommended to get extra footage in case of a bad cut or an accidentally damaged piece during installation.
This is a custom order piece and will ship separately from your lights, usually taking 1 week to be made. All sales are final so be sure of the color prior to ordering.
*Due to screen resolution limitations, product colors may not be exactly as shown
Sold by the Foot ONLY - 6' min
This is a custom order piece and will ship separately from your lights, usually taking 1 week to be made. All sales are final so be sure of the color prior to ordering.
*Due to screen resolution limitations, product colors may not be exactly as shown.
DIY Tip: Due to shipping weight costs, some installers use a local source to purchase metal. Then use tape to space holes to drill 9" apart and even get a local shop to pre-bend if needed. Eave Trim channel colors will never color match to existing homes trim due to the sun's UV damage.
Item Ordering: Sold by the foot. Enter total length required for the quanity below. Make sure to order 10% for waste or miss cuts.
Additional Products
Quick links
Contact Us
We accept
